Lamp T585 for Ecosoft UV ET-24/ EB-45
PARAMETERS
Maximum disinfected water flow 5.42 m³/h
Type of lamp T585
Max inlet pressure 8 atm
Electrical power of one emitter 85 W
Dimensions (length x diameter) 840x18 mm
Power supply 220 / 50 V / Hz
PARAMETERS
Maximum disinfected water flow 5.42 m³/h
Type of lamp T585
Max inlet pressure 8 atm
Electrical power of one emitter 85 W
Dimensions (length x diameter) 840x18 mm
Power supply 220 / 50 V / Hz
ET24UV
KEY FEATURES
- High dose of UV irradiation (30 mJ/cm2) sufficient to neutralize a wide spectrum of microorganisms
- Physical method of disinfection that does not require chemicals or generate any toxic byproducts
- Long efficient service life – up to 9 000 hours
SPECIFICATION
Performance
Replacement lamp T585 is mounted inside the body of ultravioletdisinfection unit Ecosoft ET-24 / EB-45, where microorganisms decontamination occurs.
Technical data
- Maximum disinfected water flow — 5.42 m³/hour
- Type of lamp — T585
- Maximum inlet pressure – 8 bar
- Power supply — 230 V, 50 Hz
- Power consumption of one lamp — 85 W
- Appliance for lamp malfunction control — visual
- Dimensions (length x diameter) — 840 × 18 mm
Feed water requirements
- Temperature of the treated water — +4...+30 °С
- Turbidity — 0.58 mg/L
- Total hardness — 2.5 meq/L
- Iron — 0.3 mg/L
- Manganese — 0.05 mg/L
- Hydrogen sulfide — 0.05 mg/L
ET24UV